Quality of dimming

Tony_SBT
Posts: 1
Joined: Sat Nov 30, 2019 11:52 am

Quality of dimming

Postby Tony_SBT » Sat Nov 30, 2019 1:21 pm

Hello and greetings to you all.
I'm new to this forum because I have some things to clarify in the operation of Venue Magic Express.
I used the program with incandescent lamps for several months without problems but now
that I'm switching to LED PAR RGB I note above all at slow dimming (20/30 sec) a step variation of brightness very ugly to see.
How to get a more fluid variation without steps?
I read that Venue magic updates every 1/30 sec, but I see jerky variations?
Is there anything I can do?
Thanks for your collaboration

Jannes
Posts: 4
Joined: Tue Feb 12, 2019 1:06 pm

Re: Quality of dimming

Postby Jannes » Thu Dec 12, 2019 8:45 am

Hi Tony,
I uses both, incandescent lamps and LED lighting in my show. Before I uses VenueMagic I uses several other programms or conventional light tables.

One of myLED lamps is also jerky (not fluid you see the steps) when I make a longer time fade.
Other LED spots are OK and I had that same problem with my old light programm also.

So I think this is NOT VenuMagic but the lamp (or lamp eletronics) in that specific lamp that's not able to do it well.

(just try to avoid longer fade times with that lamps... if you can)

Greetings from Holland

Ashley
Posts: 74
Joined: Mon Dec 21, 2015 2:27 pm

Re: Quality of dimming

Postby Ashley » Mon Dec 16, 2019 12:08 pm

Yes this is a common problem with less-expensive fixtures. The only real solution is to use high quality lamps/LEDs.

Who is online

Users browsing this forum: Bing [Bot] and 2 guests